Anasayfa
Kimyasallar
Analitik Kimyasallar
Tuzlar
Tuzlar
Merck 107813 Tin(II) chloride dihydrate EMPROVE® ESSENTIAL, Ph. Eur., BP, JPE 1 kg

Merck 107813 Tin(II) chloride dihydrate EMPROVE® ESSENTIAL, Ph. Eur., BP, JPE 1 kg

Merck 107813 Tin(II) chloride dihydrate EMPROVE® ESSENTIAL, Ph. Eur., BP, JPE 1 kg

Kategori

Tuzlar

Marka

MERCK

Stok Kodu

LB.M.107813.1000

Teklif Sepetine Ekle

Stok Sorunuz

Merck 107813 Tin(II) chloride dihydrate EMPROVE® ESSENTIAL, Ph. Eur., BP, JPE 1 kg
Catalogue Number	107813
Synonyms	Tin dichloride, dihydrate, Stannous chloride

Product Information
CAS number	10025-69-1
EC number	231-868-0
Grade	Ph Eur,BP,JPE
Hill Formula	Cl₂Sn * 2 H₂O
Chemical formula	SnCl₂ * 2 H₂O
Molar Mass	225.63 g/mol
HS Code	2827 39 10

Physicochemical Information
Boiling point	623 °C (1013 hPa) (anhydrous substance)
Density	2.71 g/cm3 (20 °C)
Melting Point	38 °C (anhydrous substance)
pH value	1 - 2 (100 g/l, H₂O, 20 °C)
Bulk density	1250 kg/m3
Solubility	1187 g/l

Toxicological Information
LD 50 oral	LD50 Rat 700 mg/kg

Safety Information according to GHS
Hazard Pictogram(s)
Hazard Statement(s)	H302 + H332: Harmful if swallowed or if inhaled. H314: Causes severe skin burns and eye damage. H317: May cause an allergic skin reaction. H373: May cause damage to organs through prolonged or repeated exposure. H410: Very toxic to aquatic life with long lasting effects.
Precautionary Statement(s)	P273: Avoid release to the environment. P280: Wear protective gloves/ protective clothing/ eye protection/ face protection. P301 + P330 + P331: IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. P302 + P352: IF ON SKIN: Wash with plenty of soap and water. P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P308 + P310: IF exposed or concerned: immediately call a POISON CENTER or doctor/ physician.
Signal Word	Danger
RTECS	XP8850000
Storage class	8B Non-combustible, corrosive hazardous materials
WGK	WGK 3 highly water endangering
Disposal	15 Heavy metal-containing solutions and solids: container E. Stir Raney nickel (also: Urushibara nickel) in the form of an aqueous suspension into hydrochloric acid (Cat. No. 100312) until dissolved (container E). Neither Raney nickel itself nor any filter residues should be allowed to dry out, otherwise they will spontaneously ignite in air. In this context, heavy metal means any compound of antimony, arsenic, cadmium, chromium(VI), copper, lead, nickel and tin, as well as these subtances in metallic form, if they are classified as hazardous (acc. to AbfallverzeichnisV - Waste Catalogue Ordinance, Appendix 3). Other heavy metals should be collected separately.

Safety Information
Hazard Symbols	Harmful Corrosive Dangerous for the environment
Categories of danger	harmful, corrosive, sensitizing
R Phrase	R 34-43-20/22-48-50/53 Causes burns.May cause sensitisation by skin contact.Harmful by inhalation and if swallowed.Danger of serious damage to health by prolonged exposure.Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
S Phrase	S 26-36/37/39-45 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.Wear suitable protective clothing, gloves and eye/face protection.In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible).

Storage and Shipping Information
Storage	Store at +15 °C to +25 °C.

Transport Information
Declaration (railroad and road) ADR, RID	UN 3260 , 8, II
Declaration (transport by air) IATA-DGR	UN 3260 , 8, II
Declaration (transport by sea) IMDG-Code	UN 3260 , 8, II, Segregation Group: 1 (Acids)

Specifications
Assay (iodometric, SnCl₂·2H₂O)	98.0 - 102.0 %
Identity	passes test
Appearance of solution	passes test
Appearance of solution (JPE)	passes test
Acidity or alkalinity	passes test
Sulfate (SO₄)	≤ 0.01 %
Heavy metals (as Pb)	≤ 0.005 %
As (Arsenic)	≤ 0.00015 %
Fe (Iron)	≤ 0.003 %
Hg (Mercury)*	≤ 0.00003 %
NH₄ (Ammonium)	≤ 0.01 %
Pb (Lead)*	≤ 0.005 %
Substances not precipitated with H₂S (as sulphates)	≤ 0.2 %
Residual solvents (Ph Eur/ICH)	excluded by manufacturing process
Elemental impurity specifications have been set considering ICH Q3D (Guideline for Elemental Impurities). Class 1-3 elements are not likely to be present above the ICH Q3D option 1 limit, unless specified and indicated (*).
conforms to Ph Eur, BP, JPE

Taksit Seçenekleri

Önerileriniz

Bu ürünün fiyat bilgisi, resim, ürün açıklamalarında ve diğer konularda yetersiz gördüğünüz noktaları öneri formunu kullanarak tarafımıza iletebilirsiniz.
Görüş ve önerileriniz için teşekkür ederiz.

Ürün resmi kalitesiz, bozuk veya görüntülenemiyor.

Ürün açıklamasında eksik bilgiler bulunuyor.

Ürün bilgilerinde hatalar bulunuyor.

Ürün fiyatı diğer sitelerden daha pahalı.

Bu ürüne benzer farklı alternatifler olmalı.