Merck 109065 Perchloric acid in anhydrous acetic acid, for titrations in non-aqueous media c(HClO₄) = 0.1 mol/l (0.1 N) Titripur® Reag. Ph Eur,Reag. USP 1 L
2.621,91 TL + KDV
3.146,29 TL
| Merck 109065 Perchloric Acid in anhydrous acetic acid, for titrations in non-aqueous media c(HClO₄) = 0.1 mol/l (0.1 N) Titripur® Reag. Ph Eur,Reag. USP 1 L | |
|---|---|
| Catalogue Number | 109065 |
| Product Information | |
|---|---|
| Grade | Reag. Ph Eur,Reag. USP |
| HS Code | 3824 99 92 |
| Quality Level | MQ200 |
| Physicochemical Information | |
|---|---|
| Density | 1.06 g/cm3 (20 °C) |
| Flash point | 40 °C |
| Ignition temperature | 485 °C |
| pH value | 0.1 (H₂O, 20 °C) |
| Safety Information | |
|---|---|
| Categories of danger | flammable, corrosive |
| Storage and Shipping Information | |
|---|---|
| Storage | Store at +15 °C to +25 °C. |
| Accreditation: This volumetric solution is analyzed by our calibration laboratory D-K-15185-01-00 which is accredited according to DIN EN ISO/IEC 17025 for analysis of amount-of-substance concentrations in volumetric solutions by DAkkS (Deutsche Akkreditierungsstelle - German National Accreditation Body). The accreditation certificate can be found at www.sigmaaldrich.com/ISO17025. The concentration is determined by volumetric titration and refers to 20 °C. The amount-of-substance concentration of this volumetric solution is traceable to a primary standard reference material (SRM) from the National Institute of Standards and Technology, Gaithersburg, USA (NIST SRM 84 potassium hydrogen phthalate) by means of volumetric standard potassium hydrogen phthalate (article number 1.02400), certified reference material according to ISO 17034, analyzed by our accredited calibration laboratory of Merck KGaA, Darmstadt, Germany according to DIN EN ISO/IEC 17025. The uncertainty is expressed as expanded measurement uncertainty with a coverage factor k=2 covering a confidence level of 95%. Note: The titer is a correction factor to correct for variations of the volumetric solution, the titration equipment, the temperature and other laboratory conditions. For correct titration results it is recommended to determine a titer with the laboratory specific equipment and under laboratory specific conditions directly after opening a new bottle and at regular time intervals. |