Hoşgeldiniz
Hızlı ve Güvenli Alışverişe Giriş Yapın!
Şifremi Unuttum
Üye Değil misiniz?
Kolayca Üye Olabilirsiniz.
Merck 109138 Sodium hydroxide solution c(NaOH) = 0.5 mol/l (0.5 N) Titripur® Titripac PE/Alu 4 L

Merck 109138 Sodium hydroxide solution c(NaOH) = 0.5 mol/l (0.5 N) Titripur® Titripac PE/Alu 4 L

Kategori
Volumetrik Çözeltiler
Marka
MERCK
Stok Kodu
LB.M.1091384000
Ürün Detayları
Önerileriniz
Taksit Seçenekleri
Ürün Detayları
Merck 109138 Sodium hydroxide solution c(NaOH) = 0.5 mol/l (0.5 N) Titripur® Titripac PE/Alu 4 L
Catalogue Number 109138
Replaces SX0607E; SX0607E-9; SX0607E-3
Alternate Names
  • Karl Fischer
Merck 109138 Sodium hydroxide solution c(NaOH) = 0.5 mol/l (0.5 N) Titripur® 
Product Information
HS Code 2815 12 00
Quality Level MQ200
Physicochemical Information
Density 1.02 g/cm3 (20 °C)
pH value 13.5 (H₂O, 20 °C)
Safety Information according to GHS
Hazard Pictogram(s) Hazard Pictogram(s)
Hazard Statement(s) H290: May be corrosive to metals.
H315: Causes skin irritation.
H319: Causes serious eye irritation.
Precautionary Statement(s) P234: Keep only in original packaging.
P264: Wash skin thoroughly after handling.
P280: Wear protective gloves/ eye protection/ face protection.
P302 + P352: IF ON SKIN: Wash with plenty of water.
P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P332 + P313: If skin irritation occurs: Get medical advice/ attention.
Signal Word Warning
Storage class 8B Non-combustible, corrosive hazardous materials
WGK NWG not water endangering
Disposal 28
Aqueous solutions: Container D.
Safety Information
Categories of danger irritant
Storage and Shipping Information
Storage Store at +2°C to +30°C.
Transport Information
Declaration (railroad and road) ADR, RID UN 1824 , 8, III
Declaration (transport by air) IATA-DGR UN 1824 , 8, III
Declaration (transport by sea) IMDG-Code UN 1824 , 8, III, Segregation Group: 18 (Alkalis)
Specifications
Form liquid
Amount-of-substance concentration 0.4975 - 0.5025
Measurement uncertainty +/- 0.0015
Traceability NIST SRM
Accreditation: This volumetric solution is analyzed by our calibration laboratory D-K-15185-01-00 which is accredited according to DIN EN ISO/IEC 17025 for analysis of amount-of-substance concentrations in volumetric solutions by DAkkS (Deutsche Akkreditierungsstelle - German National Accreditation Body). The accreditation certificate can be found at www.sigmaaldrich.com/ISO17025.
The concentration is determined by volumetric titration and refers to 20°C.
The amount-of-substance concentration of this volumetric solution is traceable to a primary standard reference material (SRM) from the National Institute of Standards and Technology, Gaithersburg, USA (NIST SRM 84 potassium hydrogen phthalate) by means of volumetric standard potassium hydrogen phthalate (article number 1.02400), certified reference material according to ISO 17034, analyzed by our accredited calibration laboratory of Merck KGaA, Darmstadt, Germany according to DIN EN ISO/IEC 17025. The uncertainty is expressed as expanded measurement uncertainty with a coverage factor k=2 covering a confidence level of 95%.
Note: The titer is a correction factor to correct for variations of the volumetric solution, the titration equipment, the temperature and other laboratory conditions. For correct titration results it is recommended to determine a titer with the laboratory specific equipment and under laboratory specific conditions directly after opening a new bottle and at regular time intervals.
Taksit Seçenekleri
Önerileriniz
Bu ürünün fiyat bilgisi, resim, ürün açıklamalarında ve diğer konularda yetersiz gördüğünüz noktaları öneri formunu kullanarak tarafımıza iletebilirsiniz.
Görüş ve önerileriniz için teşekkür ederiz.
Etiketler :
Merck Merck kimyasalları Merck türkiye Merck millipore Merck millipore türkiye Merck kimyasalları satış Merck kimyasalları msds merck kimyasal msds merck 109991
Merck 109138 Sodium hydroxide solution c(NaOH) = 0.5 mol/l (0.5 N) Titripur® Titripac PE/Alu 4 L Merck 109138 Sodium hydroxide solution c(NaOH) = 0.5 mol/l (0.5 N) Titripur® Titripac PE/Alu 4 L LB.M.1091384000
Merck 109138 Sodium hydroxide solution c(NaOH) = 0.5 mol/l (0.5 N) Titripur® Titripac PE/Alu 4 L

Tavsiye Et

*
*
*
 
DLAB ürünlerinde özel fısatlar
IdeaSoft® | E-Ticaret paketleri ile hazırlanmıştır.